Die-cast aluminum cabinet
The series sheet lists 500 × 500 mm and 500 × 1000 mm cabinets. Confirm the cabinet mix, wall dimensions and handling requirements before finalizing a layout.

RH · Hard connection
A rental LED cabinet for temporary outdoor stages and event screens. Specify the wall around daylight, site exposure and mounting conditions.
RH cabinets connect directly through integrated connectors, reducing the number of separate jumpers between panels. RH is the premium option for high-end productions and typically costs more than SE. Fewer separate jumpers mean fewer cable connections to check during troubleshooting, which simplifies after-sales service.
Choose SE if a lower upfront cost and flexible cable routing matter more for your project.
Compare SE Series →The series sheet lists 500 × 500 mm and 500 × 1000 mm cabinets. Confirm the cabinet mix, wall dimensions and handling requirements before finalizing a layout.
The hard-connection design uses integrated mating connectors. Request the cabinet layout and connection orientation to plan assembly and servicing.
The shared series sheet lists 900–4500 nits and front IP65 / rear IP54. Ask which brightness and protection values apply to the exact configuration quoted.
Review the screen orientation against direct sunlight. Share the venue layout, audience area and proposed support system.
Define how camera feeds and graphics will share the display. Confirm the controller and camera workflow against the quoted configuration.
Review mating connectors and cabinet orientation before laying out the wall. Confirm access to service or replace individual panels.
The Word specification sheet covers both cabinet sizes and both event environments. Confirm brightness, protection and available pitch for the configuration quoted. The RH specification table lists 7680 Hz, while the document summary mentions 3840 Hz. Confirm refresh rate before ordering.
| Parameter | Documented value |
|---|---|
| Pixel Pitch | P1.953 / P2.604 / P2.976 / P3.91 / P4.81mm |
| Pixel Density | 262,974 – 43,222 dots/m² |
| LED Type | SMD1515 / SMD2121 |
| Cabinet Size | 500×500mm / 500×1000mm |
| Refresh Rate | 7680Hz |
| Brightness | 900 – 4500nits |
| Protection Rating | Front IP65 / Rear IP54 |
| Best Viewing Distance | 2m – 50m (model dependent) |
| Input Voltage | AC110V/220V ±10% |
| Average Power Consumption | 300W/m² |
The series sheet lists options from P1.953 through P4.81. Confirm which pitches are offered for this size and installation environment.
Ask for the quoted cabinet’s front and rear protection ratings, brightness and site-specific mounting requirements.
Send your target dimensions, venue conditions and delivery date. We’ll use your brief to confirm the product configuration.